GHRP-2 (10 mg Vial) Dosage Protocol
Quickstart Highlights
GHRP-2 dosage protocols leverage this potent synthetic hexapeptide (pralmorelin) that stimulates growth hormone (GH) release by acting as a ghrelin receptor agonist in the pituitary and hypothalamus[1][2]. Researchers and clinicians have explored GHRP-2 as a diagnostic GH stimulant and investigated its potential for supporting healthy GH secretion patterns, lean body composition, recovery, and sleep quality[3][4]. This educational protocol presents a once‑daily subcutaneous approach using a practical dilution for clear insulin‑syringe measurements.
- Reconstitute: Add 3.0 mL bacteriostatic water → ~3.33 mg/mL concentration.
- Typical daily range: 100–300 mcg once daily (gradual titration).
- Easy measuring: At 3.33 mg/mL, 1 unit = 0.01 mL ≈ 33.3 mcg on a U‑100 insulin syringe.
- Timing: Bedtime administration aligns with natural nocturnal GH secretion[5]; empty stomach preferred.
- Storage: Lyophilized: freeze at −20 °C (−4 °F); after reconstitution, refrigerate at 2–8 °C (35.6–46.4 °F) and use within 28 days[6][7].
Dosing & Reconstitution Guide
Educational guide for reconstitution and daily dosing
Standard / Gradual Approach (3 mL = ~3.33 mg/mL)
| Week | Daily Dose (mcg) | Units (per injection) (mL) |
|---|---|---|
| Weeks 1–2 | 100 mcg | 3 units (0.03 mL) |
| Weeks 3–4 | 150 mcg | 4.5 units (0.045 mL) |
| Weeks 5–8 | 200 mcg | 6 units (0.06 mL) |
| Weeks 9–12 | 250–300 mcg | 7.5–9 units (0.075–0.09 mL) |
Frequency: Inject once daily subcutaneously at bedtime on an empty stomach (at least 2–3 hours after the last meal) to maximize the GH pulse[5]. For ≤10‑unit (≤0.10 mL) administrations, consider 30‑ or 50‑unit insulin syringes for improved readability.
Reconstitution Steps
- Draw 3.0 mL bacteriostatic water with a sterile syringe.
- Inject slowly down the vial wall; avoid foaming.
- Gently swirl/roll until dissolved (do not shake).
- Label with reconstitution date and refrigerate at 2–8 °C (35.6–46.4 °F), protected from light; use within 28 days[8].
Advanced / Multiple Daily Dosing (Experienced Research Use Only)
In research settings exploring enhanced GH release, protocols have used 2–3 injections per day[4]. Be aware that chronic high-frequency stimulation can lead to receptor desensitization (tachyphylaxis)[9][10].
| Phase | Dose per Injection (mcg) | Frequency | Units (per injection) (mL) |
|---|---|---|---|
| Phase 1 (Weeks 1–2) | 100 mcg | Twice daily | 3 units (0.03 mL) |
| Phase 2 (Weeks 3–4) | 150 mcg | Twice daily | 4.5 units (0.045 mL) |
| Phase 3 (Weeks 5–8) | 200 mcg | 2–3× daily | 6 units (0.06 mL) |
A “5 days on / 2 days off” cycle is often suggested to help restore receptor sensitivity[9]. Even with breaks, be mindful that chronic stimulation can attenuate the GH response over time.
Supplies Needed
Plan based on an 8–12 week daily protocol with gradual titration (once‑daily regimen).
-
Peptide Vials (GHRP-2, 10 mg each):
- 8 weeks ≈ 1 vial (~9.1 mg total usage)
- 12 weeks ≈ 2 vials (~15–16 mg total)
- 16 weeks ≈ 3 vials (~22–23 mg total)
-
Insulin Syringes (U‑100, 0.3 mL or 0.5 mL recommended):
- Per week: 7 syringes (1/day)
- 8 weeks: 56 syringes
- 12 weeks: 84 syringes
- 16 weeks: 112 syringes
-
Bacteriostatic Water (10 mL bottles): Use 3.0 mL per vial for reconstitution.
- 8 weeks (1 vial): 3 mL → 1 × 10 mL bottle
- 12 weeks (2 vials): 6 mL → 1 × 10 mL bottle
- 16 weeks (3 vials): 9 mL → 1 × 10 mL bottle
-
Alcohol Swabs: One for the vial stopper + one for the injection site each day.
- Per week: 14 swabs (2/day)
- 8 weeks: 112 swabs → recommend 2 × 100‑count boxes
- 12 weeks: 168 swabs → recommend 2 × 100‑count boxes
- 16 weeks: 224 swabs → recommend 3 × 100‑count boxes
Protocol Overview
Concise summary of the once‑daily regimen.
- Goal: Support pulsatile GH release for research into body composition, recovery, and sleep quality[4].
- Schedule: Daily subcutaneous injections for 8–12 weeks (extend to 16 weeks if desired).
- Dose Range: 100–300 mcg daily with gradual titration.
- Reconstitution: 3.0 mL per 10 mg vial (~3.33 mg/mL) for accurate unit measurements.
- Storage: Lyophilized frozen; reconstituted refrigerated; avoid repeated freeze–thaw.
Dosing Protocol
Suggested daily titration approach.
- Start: 100 mcg daily; increase by ~50 mcg every 1–2 weeks as tolerated.
- Target: 200–300 mcg daily by Weeks 5–12.
- Frequency: Once per day (subcutaneous) at bedtime.
- Cycle Length: 8–12 weeks; optional extension to 16 weeks.
- Timing: Bedtime on an empty stomach; rotate injection sites.
Storage Instructions
Proper storage preserves peptide quality.
Important Notes
Practical considerations for consistency and safety.
- Use new sterile insulin syringes; dispose in a sharps container.
- Rotate injection sites (abdomen, thighs, upper arms) to reduce local irritation.
- Inject slowly; wait a few seconds before withdrawing the needle.
- Document daily dose and site rotation to maintain consistency.
- Reconstituted vials and opened bacteriostatic water should be discarded after 28 days[8].
How This Works
GHRP-2 (pralmorelin) is a Growth Hormone Releasing Peptide that binds to the ghrelin/GHS (Growth Hormone Secretagogue) receptor (GHS-R1a) on pituitary somatotroph cells and in the hypothalamus[1]. By activating these receptors, GHRP-2 triggers a potent pulse of GH release, independent of the usual GH-releasing hormone (GHRH) pathway. Research demonstrates GHRP-2 can stimulate GH even when GHRH action is impaired[11]. Unlike exogenous GH, GHRP-2 preserves natural pulsatile secretion patterns and works synergistically with endogenous GHRH[4].
Potential Benefits & Side Effects
Observations from preclinical and clinical literature.
- Supports pulsatile GH release and may increase IGF-1 levels over time with consistent use[4].
- May support improvements in body composition, recovery, and sleep quality when combined with appropriate lifestyle factors.
- Transient increases in appetite (ghrelin receptor activation), cortisol, and prolactin have been observed in studies[2].
- Receptor desensitization (tachyphylaxis) may occur with continuous daily use; cycling protocols may help maintain responsiveness[9][10].
- Generally well tolerated; occasional mild injection‑site reactions (redness/itch) may occur with subcutaneous administration.
Lifestyle Factors
Complementary strategies for best outcomes.
- Pair with a balanced, protein‑forward diet tailored to energy needs.
- Combine resistance training and aerobic activity to reinforce metabolic adaptations.
- Prioritize sleep and stress management to support adherence and recovery.
- Inject on an empty stomach (2–3 hours post-meal) to maximize the GH response.
Injection Technique
General subcutaneous guidance from clinical best‑practice resources[12].
- Clean the vial stopper and skin with alcohol; allow to dry.
- Pinch a skinfold; insert the needle at 45–90° into subcutaneous tissue[12][13].
- Do not aspirate for subcutaneous injections; inject slowly and steadily[12].
- Rotate sites systematically (abdomen, thighs, upper arms) to avoid lipohypertrophy.
- Use fine-gauge needles (30 G or smaller) and small injection volumes to minimize discomfort[14].
Recommended Source
We recommend Pure Lab Peptides for high‑purity GHRP-2 (10 mg).
Why Pure Lab Peptides?
- High‑purity (≥98%), third‑party‑tested lots with batch COAs (HPLC/MS verified).
- Consistent, ISO‑aligned handling and documentation.
- Reliable fulfillment to maintain cold‑chain integrity.
Important Note
This content is for educational purposes only and is not medical advice.
References
-
Wikipedia
— Pralmorelin (GHRP-2): peptide identity, mechanism of action, and ghrelin receptor agonism -
PubMed
— Effects of GHRP-2 and hexarelin on GH, prolactin, ACTH, and cortisol levels in man -
PubMed
— Diagnostic studies with IV and intranasal GHRP-2 in children of short stature -
PMC
— Growth Hormone Secretagogue Treatment in Hypogonadal Men Raises Serum IGF-1 Levels -
Endocrine Reviews
— Growth hormone secretion during sleep: timing and physiological significance -
Sigma-Aldrich (MilliporeSigma)
— Peptide Handling and Storage Guidelines (lyophilized storage at −20 °C) -
GenScript
— Peptide Storage and Handling Guidelines (freeze-thaw avoidance, aliquoting) -
CDC
— Injection Safety: Multi-dose vial 28-day rule and safe injection practices -
PubMed
— Five-day subcutaneous GHRP-2 treatment: response attenuation (tachyphylaxis) in healthy men -
Asian-Australas J. Anim. Sci.
— Effect of twice-daily GHRP-2 in swine: GH peak attenuation by Day 10 -
PMC
— GH response to GHRP-2 in GH-deficient mice: GHRH-independent mechanism -
MedlinePlus
— Subcutaneous Injections: site selection, angle technique, and sharps disposal -
OncoLink
— How to Give a Subcutaneous Injection: technique and site rotation -
PMC
— Subcutaneous Injection of Drugs: factors influencing pain and comfort -
Pure Lab Peptides
— GHRP-2 (10 mg) product page (quality and batch documentation)


